- Ultimate in precision dispensing
- Clog resistant “stay fresh” bottle
- 60% less mess
Scotch Super Glue Liquid in Precision Applicator features patented droplet control technology for the ultimate in precision dispensing. The clog resistant “”stay fresh”” bottle avoids dry out, so you can use the bottle over and over again. Use on wood, metal, ceramic, leather, rubber, vinyl, some plastics, and more.
Patented droplet control technology . . . for 60% less mess than metal tube super glue liquids
Ultimate precision – droplets are controlled with easy-squeeze finger pads of dispenser
Clog-resistant “”stay fresh”” bottle. Avoids dry-out, so you can use the bottle over and over again
Advanced formula super glue liquid
Bonds to wood, metal, ceramic, leather, rubber, vinyl, some plastics, and more
Made in Taiwan, Province Of China
Clean surface and thoroughly dry. Point tip away from face and body. Do not squeeze dispenser buttons while puncturing. To puncture turn nozzle and cap assembly down clockwise until fully seated and tight. Remove cap by turning counterclockwise. Apply adhesive lightly to one surface only. Firmly press parts together. Hold until set. Wipe off excess immediately with a paper towel. Wipe applicator tip with cloth or tissue after use. Replace cap. Screw on tightly. Store with tip up in a cool, dry place.
Combustible. Bonds skin and eyes instantly. Causes eye and skin irritation. May cause allergic skin reaction. May cause nose and throat irritation. Skin contact through clothing may cause burns. Keep out of reach of children. Keep away from heat and flame. Avoid eye and skin contact. Do not get on skin or clothing. Avoid breathing of vapors. Use only with adequate ventilation. Do not swallow. Wash thoroughly after handling. Avoid excessive use of force to free bonded area. Close container after each use. Suggested first aid: Eye contact: Do not force eyelids open. Immediately flush with large amounts of water for at least 15 minutes. Get immediate medical attention. Skin contact: Wash affected area with soap and water. If signs/symptoms develop, get medical attention. For skin bonds: Quickly soak in warm water and avoid use of excessive force to free bonded area. If unable to free bonded area, or if lips or mouth are bonded, get medical attention. If spilled on clothing, immediately flush with large quantities of water. Do not remove bonded clothing; contact a physician. Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention. If swallowed: Do not induce vomiting. Get medical attention. For additional health and safety information, call 1-800-3M-HELPS.