Description

Details
Holds 12 lb (5.4 kg). Damage-free hanging. Holds strongly. Removes cleanly. Up to 18 in x 24 in (45 cm x 60 cm). Limited Warranty and Limitation of Liability (for product sold in USA): This product will be from manufacturing defects. If defective, your exclusive remedy shall be, at 3M’s option, product replacement or refund. 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential. command.com. Made in USA with globally sourced materials.

Directions
Wait for 7 days after painting before use. Do not apply strips to paper or soft surfaces on frame. Remove hanging hardware from back of frame. Failure to follow instructions carefully may cause damage. Apply: 1. Clean wall with rubbing alcohol. Do not use household cleaners; 2. Separate strips. Press two strips together until they click. Each pair of strips holds 3 lb; 3. Remove one side of liners. Place each pair of strips as shown. Press firmly; 4. Remove remaining liners and press frame on wall. Press each side firmly for 30 sec.; 5, to ensure adhesive hold, grab bottom corners and peel frame from wall. Do not pull straight off. Press each strip firmly for 30 seconds; 6. Wait 1 hour to reattach frame. Line up frame with strips on wall and press until each pair of strips click. Remove: 1. Grab bottom corners and peel frame from wall. Do not pull straight off; 2. Never pull the strip towards you! Always pull straight down; 3. Stretch the strip slowly against the wall at least 12 inches to release.

Warnings
Caution: do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items. Use indoors 50 degrees 105 degrees F.